Homemade wind turbine is an innovative project with environmental significance and practical value, but it needs to comply with certain procedures and regulations when carrying out related construction and use. The following is an introduction to the procedures required for homemade wind turbines for your reference. Procedures before project approval: 1.planning permission: When choosing the installation location of homemade wind turbines, you need to understand the local planning permission. Different districts will have different planning management policies and may need to submit a planning application to the relevant authorities for approval. 2.land procedures: if the homemade wind turbine needs to occupy land or buildings, you need to go through the corresponding land procedures. This may include land use rights applications, planning permits for building land, etc. 3. Environmental impact assessment: In some areas, the installation of homemade wind turbines may require an environmental impact assessment to assess their potential impact on the surrounding environment. This requires the commission of a professional body to carry out an assessment and perform the relevant procedures in accordance with the assessment results. 4, construction project planning permission: for the specific construction projects of homemade wind turbines, it may be necessary to submit an application for project planning permission to the local construction administrative department to ensure that it meets the relevant building codes and safety standards. Procedures for the construction phase: 1, construction permit: Before starting the construction of homemade wind turbines, it may be necessary to submit an application for construction permit to the relevant departments and approve it in accordance with relevant regulations. 2, safety production permit: the construction and operation of homemade wind turbines involve safety production issues, so it may be necessary to apply to the relevant departments for safety production permit to ensure its safe and reliable operation. Procedures at the use stage: 1. grid-connected approval: if the power generation of homemade wind turbines exceeds a certain scale and needs to be connected to the grid for grid-connected power generation, it is necessary to apply to the power management department for grid-connected approval to meet the relevant technical requirements and standards. 2.power generation license: For the electricity generated by homemade wind turbines, it may be necessary to apply for a power generation license to the energy management department to legally produce and sell electricity. 3.operation and maintenance records: the operation and maintenance of homemade wind turbines need to be recorded, including equipment information, operation and maintenance plans, safety measures, etc., to ensure the safe and stable operation of equipment. Other relevant procedures: 1. tax registration: involving the income and tax issues generated by self-made wind turbines, tax registration may be required to fulfill the relevant tax declaration obligations. 2. regulatory filing: according to the relevant local regulations, it may be necessary to carry out the regulatory filing of homemade wind turbines, so that the regulatory authorities can manage and supervise them. It should be noted that the specific regulations and requirements may vary in different regions, and the above is only a general introduction. Therefore, when carrying out homemade wind turbine projects, professionals should be consulted in light of the actual local situation to ensure that all relevant procedures are handled and relevant activities are carried out legally and in compliance.

Nowadays the vertical axis wind power market is expanding with the increasing global demand for renewable energy. It is predicted that in the coming years, the vertical axis wind power market will enter a period of rapid development and become an important component of the renewable energy field. However, vertical axis wind power also faces some challenges. For example, how to reasonably designe the height and width of a vertical axis wind turbine to ensure optimal wind energy capture. In addition, the market demand of vertical axis wind power is still relatively small, requiring more investment and research and development to drive its development. Building a vertical axis wind turbine platform requires two major aspects, software design and hardware design. In hardware design, it mainly includes the overall structural design of the wind turbines, the selection of component materials, and the size design of each part of the structure. In software design, it mainly includes aerodynamic analysis of vertical axis wind turbines, control strategies for large wind turbines, and development of control software. The two aspects of software and hardware design are both independent and interconnected, each based on other aspects, and ultimately combined to form a unified system. For the development and utilization of vertical axis wind turbines, not only does it require in-depth research in control strategies, but also the hardware conditions of the fans cannot be ignored. The ultimate goal is to optimize the design of various aspects of the wind turbine under various conditions, so that the wind turbine can better utilize wind energy, ensure that the output power of the wind turbine reaches the highest efficiency, and for the wind turbine itself, increase its service life, facilitate maintenance, and construct and repair the finished product more economically. Overall, vertical axis wind power is a promising new type of wind power technology. With the continuous progress of technology and increasing market demand, vertical axis wind power is expected to become an important role in the field of renewable energy in the future.

Firstly，How to choose a household wind turbine. Household wind turbines are devices that can generate electricity by utilizing wind energy. When choosing a home wind turbine, the following factors need to be considered : 1.Economic cost: The purchase and installation costs of household wind turbines need to be considered, generally not suitable for households with low electricity consumption. 2.Geographical environment: Household wind turbines need to be placed in sufficiently spacious and exposed areas to the wind, and it doesn't cause noise pollution to neighbors. 3.Daily electricity demand: When choosing a domestic wind turbine, it is necessary to consider the daily electricity demand of the household and the resulting electricity consumption. Secondly，Wattage requirements for household wind turbines Different households have different needs for electricity. Generally speaking, household wind turbines below 2000 watts can meet the daily electricity needs of most households. But if there are many household appliances used or if high-power appliances are frequently needed, then you need to consider buying more powerful household wind turbines. When considering the wattage demand of household wind turbines, we also need to pay attention to the following aspects: 1.Wind energy source: The output power of wind turbines is directly related to wind speed,The appropriate equipment needs to be selected according to the full degree of wind energy in the location. 2.Time: Wind energy has a time limit,so when choosing a household wind turbine,It is necessary to consider the average wind speed and household electricity time in the location to consider how much power to buy wind turbines. 3.Seasonal variation: Seasonal variations can also affect the output of wind turbines. To sum up，The wattage demand of household wind turbines is related to various factorssuch as the actual electricity demand of the household and the wind energy adequacy of the location.But what specific power of household wind turbines do you need to purchase,It also needs to be considered in light of the actual situation.