We usually have horizontal axis wind turbines with 3 blades, 5 blades or 6 blades, and can also be customized according to customer needs.

Wind turbines are usually used in off-grid or on-grid systems.

With the process of urbanization, street lights play an extremely important role in our lives, providing lighting and security for pedestrians and vehicles. However, the traditional streetlight power supply often relies on the power grid, there are problems such as energy consumption and environmental pollution. In order to solve these problems, more and more places have begun to use new energy powered street lights, including solar and wind power.

So, is it easy to use wind turbines for street lights? This is described below.

First of all, wind power is a renewable and clean energy, with environmental protection and sustainable development advantages. Compared to traditional coal-fired power generation or fossil fuel power generation, wind power generation does not produce atmospheric pollutants and greenhouse gas emissions, and has a lower impact on the environment. Therefore, the use of wind turbines can reduce energy consumption, reduce carbon emissions, and is conducive to environmental protection.

Secondly, wind turbines have high stability and reliability. Street lights need to be continuously powered at night, and wind turbines can automatically adjust the output power according to the wind speed to ensure that the street lights continue to light. Although the wind has a certain uncertainty, under the right geographical conditions and appropriate design, wind turbines can provide a stable power supply.

In addition, wind turbines for street lights also have a certain degree of flexibility and adaptability. Compared with solar photovoltaic panels that need full sunlight to generate electricity, wind turbines have relatively low wind requirements and can be used in different weather and environmental conditions. Especially at night or in rainy areas, wind turbines can effectively supplement the shortage of solar energy and ensure the normal operation of street lights.

In addition, with the continuous progress and innovation of technology, wind power technology is also constantly improving. Modern wind turbines use more efficient blade designs, intelligent control systems and reliable materials to improve conversion efficiency and reliability, and reduce noise and vibration.

However, there are some challenges and limitations with wind turbines for street lighting. First, the adequacy and stability of wind resources is a key factor. If the wind speed at the installation site is low or unstable, the power generation effect of the wind turbine may be affected. Secondly, the installation and maintenance costs of wind turbines are relatively high, and the investment and operating expenses of equipment need to be taken into account.

In summary, wind turbines for street lights have certain advantages in terms of environmental protection, reliability and adaptability. However, whether it is suitable for the use of wind turbines also needs to consider the local wind energy resources, economic benefits and actual needs. It is hoped that with the continuous improvement of technology and the reduction of costs, more and more areas can use wind turbines to power street lights, and promote the application of clean energy and sustainable development.

The height of the wind turbine generally refers to the vertical distance between the fan axis line and the ground. The height of a wind turbine has an important effect on its power generation efficiency and stability. Here are some facts about the height of wind turbines:

First of all, the height of the wind turbine is usually about 80 meters to 160 meters. With the continuous progress of technology, the height of some new wind turbines can even reach more than 200 meters. The higher the height of the fan, in general, the greater the power generated.

Secondly, the height selection of wind turbines is affected by a variety of factors. One of the main factors is the wind speed at ground level. In general, the lower the wind speed at the ground level, the higher the fan needs to be in order to obtain a larger wind energy resource. In addition, it is also necessary to consider many factors such as terrain, climate conditions, and the surrounding environment.

In addition, with the development of wind power generation technology, the fan lifting system is also constantly improving. By increasing the height of the tower, increasing the length of the blade and improving the blade design, the height of the fan is increased, and the power generation efficiency is improved.

In addition, the height of the wind turbine will also have a certain impact on the surrounding environment and ecosystem. Therefore, when choosing the height of the fan, it is also necessary to carry out a careful environmental impact assessment and ecological protection measures.

In general, the height of wind turbines is a complex system engineering problem that requires comprehensive consideration of many factors. With the continuous progress and innovation of technology, it is believed that the height of wind turbines will continue to increase in the future and make greater contributions to the development of clean energy.

As renewable energy wind energy is more and more concerned by people, recently many friends consult us about medium and small wind turbines on the Internet. We believe that the coverage rate of medium sized and small wind turbines will be higher and higher in the future. The key points to select the midium and small type wind turbines are as follows.

1. Wind turbine blades

It is necessary to use high-strength nylon composite material, high strength, good toughness, anti-ultraviolet, anti-corrosion, anti-wind, with good aerodynamic performance .

2. Bearing

It needs to be a first-line brand, and such wind turbines have high efficiency, wear-resistant, durable and long service life.

3. Magnetic steel

Magnetic steel using rare earth NdFeb permanent magnet, high efficiency and light weight, less energy consumption, large output power.

4.Anti-strong wind tail design

It is necessary to have a pre-offset design of the wind turbine tail rudder, so that the automatic alignment of the windward direction, improve the output power while taking into account the adjustment and strong wind protection.

5.Carbon brush and brush ring structure

With such a device, the electricity of the wind turbine can be passed from the carbon brush to the brush ring, and the brush ring will draw out the electricity; When the wind turbine rotates, it rotates to solve the problem of cable breakage.

6. Connection method

The use of casing connection, high safety, will not occur racing phenomenon, installation is also very convenient.that installing fans in the field is not only technical work, but also physical work. The ease of installation is a boon for field installers.

Nair Wind Power is mainly specialized in 100W-200kW small and medium-sized wind turbines, vertical axis wind turbines, horizontal axis wind turbines, wind turbines for street lamps, wind and solar complementary street lamp systems, new energy field monitoring systems, distributed household power supply systems, scenic lighting systems and other one-stop services, Exported to the United States, Germany, France, Canada, Norway, Australia and many other countries and regions. Well loved and praised by customers. Welcome to contact us for more questions.