Nowadays the vertical axis wind power market is expanding with the increasing global demand for renewable energy. It is predicted that in the coming years, the vertical axis wind power market will enter a period of rapid development and become an important component of the renewable energy field. However, vertical axis wind power also faces some challenges. For example, how to reasonably designe the height and width of a vertical axis wind turbine to ensure optimal wind energy capture. In addition, the market demand of vertical axis wind power is still relatively small, requiring more investment and research and development to drive its development.

Building a vertical axis wind turbine platform requires two major aspects, software design and hardware design. In hardware design, it mainly includes the overall structural design of the wind turbines, the selection of component materials, and the size design of each part of the structure. In software design, it mainly includes aerodynamic analysis of vertical axis wind turbines, control strategies for large wind turbines, and development of control software.

The two aspects of software and hardware design are both independent and interconnected, each based on other aspects, and ultimately combined to form a unified system. For the development and utilization of vertical axis wind turbines, not only does it require in-depth research in control strategies, but also the hardware conditions of the fans cannot be ignored. The ultimate goal is to optimize the design of various aspects of the wind turbine under various conditions, so that the wind turbine can better utilize wind energy, ensure that the output power of the wind turbine reaches the highest efficiency, and for the wind turbine itself, increase its service life, facilitate maintenance, and construct and repair the finished product more economically.

Overall, vertical axis wind power is a promising new type of wind power technology. With the continuous progress of technology and increasing market demand, vertical axis wind power is expected to become an important role in the field of renewable energy in the future.

The correct use of wind turbines is crucial for their normal operation and reliability. The following are the precautions to be taken when using wind turbines:

1. If the motor is found to be working abnormally, shaking or making abnormal sounds, it should be stopped for inspection.

2. When the fan rotates at high speed, do not stand or perform other work on the direction of the rotation plane of the wind turbine to prevent the blades from flying out and injuring people.

3. The battery should be kept dry and clean, and metal objects should not be placed on the battery pack to prevent short circuits.

4. Do not place the negative grounding of the electrical box and the single matched reverse order together to avoid short circuits. Use the reverse power supply according to the reverse power supply manual.

5. The tightener of the stay wire will automatically loosen when encountering strong winds. After adjustment, it can be locked with iron wire. After each strong wind, check if the stay wire is loose and promptly eliminate any looseness. (Upright pole must be vertical)

6. Wind turbines should be wired separately and not mixed with other lines. It is recommended to use DC power for lighting, and AC power output from inverters can be used for household appliances. (The inverter and inverter output lines cannot be connected in parallel, and the inverter output line cannot be connected to the mains.)

7.When wiring the electrical box, first connect the battery and then connect the output line of the generator. When disassembling, first disassemble the output line of the generator and then disconnect the wiring of the battery pack

8.The shutdown switch of the electrical box is usually in the starting position, and is used for temporary shutdown when the battery is fully charged or in defense against severe storms. Only the wind wheel is slowly running and unplugged to the shutdown position, and the switch is not allowed to be unplugged when rotating at high speed.

Overall, the proper use of wind turbines is essential to ensure equipment safety, improve performance and extend service life. This is also a key measure to ensure the reliable operation and efficient generation of wind power systems.