We mainly produce 100W~50KW vertical axis wind turbines.

Homemade wind turbine is an innovative project with environmental significance and practical value, but it needs to comply with certain procedures and regulations when carrying out related construction and use. The following is an introduction to the procedures required for homemade wind turbines for your reference.

Procedures before project approval:

1.planning permission: When choosing the installation location of homemade wind turbines, you need to understand the local planning permission. Different districts will have different planning management policies and may need to submit a planning application to the relevant authorities for approval.

2.land procedures: if the homemade wind turbine needs to occupy land or buildings, you need to go through the corresponding land procedures. This may include land use rights applications, planning permits for building land, etc.

3. Environmental impact assessment: In some areas, the installation of homemade wind turbines may require an environmental impact assessment to assess their potential impact on the surrounding environment. This requires the commission of a professional body to carry out an assessment and perform the relevant procedures in accordance with the assessment results.

4, construction project planning permission: for the specific construction projects of homemade wind turbines, it may be necessary to submit an application for project planning permission to the local construction administrative department to ensure that it meets the relevant building codes and safety standards.

Procedures for the construction phase:

1, construction permit: Before starting the construction of homemade wind turbines, it may be necessary to submit an application for construction permit to the relevant departments and approve it in accordance with relevant regulations.

2, safety production permit: the construction and operation of homemade wind turbines involve safety production issues, so it may be necessary to apply to the relevant departments for safety production permit to ensure its safe and reliable operation.

Procedures at the use stage:

1. grid-connected approval: if the power generation of homemade wind turbines exceeds a certain scale and needs to be connected to the grid for grid-connected power generation, it is necessary to apply to the power management department for grid-connected approval to meet the relevant technical requirements and standards.

2.power generation license: For the electricity generated by homemade wind turbines, it may be necessary to apply for a power generation license to the energy management department to legally produce and sell electricity.

3.operation and maintenance records: the operation and maintenance of homemade wind turbines need to be recorded, including equipment information, operation and maintenance plans, safety measures, etc., to ensure the safe and stable operation of equipment.

Other relevant procedures:

1. tax registration: involving the income and tax issues generated by self-made wind turbines, tax registration may be required to fulfill the relevant tax declaration obligations.

2. regulatory filing: according to the relevant local regulations, it may be necessary to carry out the regulatory filing of homemade wind turbines, so that the regulatory authorities can manage and supervise them.

It should be noted that the specific regulations and requirements may vary in different regions, and the above is only a general introduction. Therefore, when carrying out homemade wind turbine projects, professionals should be consulted in light of the actual local situation to ensure that all relevant procedures are handled and relevant activities are carried out legally and in compliance.

Nowadays the vertical axis wind power market is expanding with the increasing global demand for renewable energy. It is predicted that in the coming years, the vertical axis wind power market will enter a period of rapid development and become an important component of the renewable energy field. However, vertical axis wind power also faces some challenges. For example, how to reasonably designe the height and width of a vertical axis wind turbine to ensure optimal wind energy capture. In addition, the market demand of vertical axis wind power is still relatively small, requiring more investment and research and development to drive its development. 

Building a vertical axis wind turbine platform requires two major aspects, software design and hardware design. In hardware design, it mainly includes the overall structural design of the wind turbines, the selection of component materials, and the size design of each part of the structure. In software design, it mainly includes aerodynamic analysis of vertical axis wind turbines, control strategies for large wind turbines, and development of control software.

The two aspects of software and hardware design are both independent and interconnected, each based on other aspects, and ultimately combined to form a unified system. For the development and utilization of vertical axis wind turbines, not only does it require in-depth research in control strategies, but also the hardware conditions of the fans cannot be ignored. The ultimate goal is to optimize the design of various aspects of the wind turbine under various conditions, so that the wind turbine can better utilize wind energy, ensure that the output power of the wind turbine reaches the highest efficiency, and for the wind turbine itself, increase its service life, facilitate maintenance, and construct and repair the finished product more economically.

Overall, vertical axis wind power is a promising new type of wind power technology. With the continuous progress of technology and increasing market demand, vertical axis wind power is expected to become an important role in the field of renewable energy in the future.

With the improvement of people's awareness of environmental protection and the wide application of renewable energy, we believe that many friends have seen wind turbines during their travels. Now let's take a look at the advantages and disadvantages of vertical axis wind turbines.

First, advantages of vertical axis wind turbines as below:

A, Strong wind resistance. The principle of horizontal rotation and triangular double pivot design makes it less susceptible to wind pressure and can withstand typhoons of 45 meters per second.

B, No auxiliary systems need to be installed. Compared to horizontal axis fans, vertical axis fans have blades that rotate parallel to the ground, allowing wind energy to be obtained from various directions. There is no need to add yaw devices to adjust the direction of wind energy reception like horizontal axis fans.  The overall structure has become simpler, reducing the vibration generated by fan operation to a certain extent and improving its reliability.

Second, disadvantages of vertical axis wind turbines as below:

A, The starting performance index of the vertical axis fan is worse than that of the horizontal axis fan,

B, During the rotation of the blades, negative torque is generated at some positions, resulting in low output efficiency of the fan;

C, Common issues for all wind turbines: vibration resistance, especially for large wind turbines;

Naier Wind Power specializes in 100W-500kW small and medium-sized wind turbines, mainly including vertical axis wind turbines, horizontal axis wind turbines, street light wind turbines, wind solar complementary street light systems, new energy field monitoring systems, decentralized household power supply systems, scenic area lighting systems, and other one-stop services. The products are exported to multiple countries and regions such as the United States, Germany, France, Canada, Norway, Australia, and are deeply loved and praised by customers. If you want to know more about vertical axis wind turbines, please kindly contact us or leave message for more informations.

With the improvement of people's awareness of environmental protection and the wide application of renewable energy, we believe that many friends have seen wind turbines during their travels. Today, let us tell you the more details about vertical axis wind turbines.

According to the principle of vertical axis wind turbine,The speed of the wind turbine increases rapidly，its power generation rising speed is correspondingly faster, and the power generation curve becomes full. Under the same power conditions, the rated wind speed of the vertical axis wind turbine is smaller than the horizontal axis wind turbine, and the vertical axis wind turbine generates a large amount of electricity when operating at low wind speed.

From the mechanical analysis, the higher power of the vertical axis wind turbine, the the longer of the blades, the longer the distance between the center point of the parallel rod and the center point of the generator shaft,the worse the wind resistance ability, therefore, the triangular vector method can make up for some of the above shortcomings.

In the structure, we use the design of straight blade and triangular double fulcrum for vertical axis wind turbines, and the main stress points are concentrated in the hub, which solves the problems of blade falling off, breaking and blade flying out. The blades of vertical axis wind turbine form a circle according to the same Angle difference, so the design purpose can reduce the pressure on the center support. In addition, a series of auxiliary equipment such as gear boxes, reduction boxes and transmission devices can be placed on the working platform relatively close to the ground, reducing the weight of the fan itself, reducing the construction and maintenance costs of the fan to a certain extent, and the vertical axis wind turbine can be used in building integration, which is conductive to urban construction. Therefore, the overall performance index is high.

If you are interested in vertical axis wind turbines or have any questions, you can leave messages or private messages in the background.